La nueva función de tarjetas de memoria es útil para memorizar preguntas.
?Cambia tu modo de estudio
En cualquier momento, puedes cambiar el modo de estudio y alternar entre el modo de práctica y el modo de examen. En el modo de práctica, puedes configurar, por ejemplo, el número de preguntas o test, y otros parámetros para ayudarte a estudiar.
Aleatorizado | 10 Preguntas por test | 20 Minutos | 70% para aprobar|
Para volver a configurar su modo de estudio nuevamente y cambiar, por ejemplo, el número de test, ya sea que tenga preguntas aleatorias y todos los demás parámetros de configuración.
?Configuración del simulador
Autodesplazamiento: puede usar el desplazamiento automático del test que ocurre tan pronto como responda una o todas las respuestas a una pregunta correctamente. El desplazamiento automático se activa si respondes una sola respuesta, o tan pronto como respondas todas las respuestas obligatorias. Modo de aprendizaje: durante el modo de aprendizaje puedes obtener un resultado en tiempo real para tu respuesta.
Prueba gratuita
Pregunta: / 10
20:00Min. restantes
?Reiniciar el test actual
Para reiniciar el test actual limpiando todas sus respuestas y el tiempo utilizado hasta ahora. ADVERTENCIA: Todas las respuestas se perderán.
Pregunta: / 10
4.8(744 Votos)
Test
Pregunta 1/101/10
Acoustics
Acoustics
Acoustics
In acoustics, what term refers to the measurement of sound intensity?
Seleccione la respuesta:Seleccione la respuesta
1 respuesta correcta
A.
Decibel
B.
Frequency
C.
Amplitude
D.
Wavelength
Decibel (dB) is the unit used to measure sound intensity, which is the amount of energy in a sound wave. It is a logarithmic unit, meaning that an increase of 10 dB represents a tenfold increase in sound intensity. Frequency refers to the number of sound waves per second, amplitude refers to the height of the sound wave, and wavelength refers to the distance between two consecutive peaks of the sound wave.
Respuesta Correcta: A
Test
Pregunta 2/102/10
Centrifugal Force
Centrifugal Force
Centrifugal Force
A centrifugal force is a type of _____.
Seleccione la respuesta:Seleccione la respuesta
1 respuesta correcta
A.
pseudo force
B.
electric force
C.
frictional force
D.
gravitational force
Centrifugal force is a pseudo-force that appears to act on a body moving in a circular path and pushes the body away from the center of rotation. It is called a pseudo-force because it is not an actual force, but rather the result of the body's inertia wanting to continue moving in a straight line.
Respuesta Correcta: A
Test
Pregunta 3/103/10
Electricity
Electricity
Electricity
A circuit has a resistance of 20 ohms and a current of 2 amps. What is the voltage?
Seleccione la respuesta:Seleccione la respuesta
1 respuesta correcta
A.
10 volts
B.
20 volts
C.
60 volts
D.
40 volts
Ohm's Law states that voltage = current x resistance. In this case, voltage = 2 amps x 20 ohms = 40 volts.
Respuesta Correcta: D
Test
Pregunta 4/104/10
Fluids
Fluids
Fluids
A fluid has a viscosity of 0.5 Pa·s. Which of the following statements is true about the fluid?
Seleccione la respuesta:Seleccione la respuesta
1 respuesta correcta
A.
It is thick and flows slowly
B.
It is thick and flows quickly
C.
It is thin and flows slowly
D.
It is thin and flows quickly
A fluid with a viscosity of 0.5 Pa·s is considered to be thick and flows slowly. Viscosity is a measure of a fluid's resistance to flow. The higher the viscosity, the thicker the fluid and the slower it flows.
Respuesta Correcta: A
Test
Pregunta 5/105/10
Force and Torque
Force and Torque
Force and Torque
Which of the following is a measure of rotational force?
Seleccione la respuesta:Seleccione la respuesta
1 respuesta correcta
A.
Velocity
B.
Mass
C.
Momentum
D.
Torque
Torque is a measure of rotational force that causes an object to rotate around an axis or pivot point. It is calculated by multiplying the force applied to an object by the distance from the axis of rotation. Mass, velocity, and momentum are measures of linear motion and are not directly related to torque.
Respuesta Correcta: D
Test
Pregunta 6/106/10
Gears
Gears
Gears
In a car's transmission, what is the function of the synchronizer?
Seleccione la respuesta:Seleccione la respuesta
1 respuesta correcta
A.
To shift the gears up or down
B.
To match the rotational speeds of the gears before they engage
C.
To engage and disengage the clutch
D.
To increase or decrease the engine's RPM
The synchronizer is responsible for matching the rotational speeds of the gears before they engage, which helps prevent grinding or damage to the gears. This is especially important when shifting into lower gears at high speeds.
Respuesta Correcta: B
Test
Pregunta 7/107/10
Hydraulics
Hydraulics
Hydraulics
A hydraulic system has a cylinder with a radius of 6 cm and a piston with a radius of 2 cm. If a force of 100 N is applied to the piston, what will be the force in the cylinder?
Seleccione la respuesta:Seleccione la respuesta
1 respuesta correcta
A.
200 N
B.
300 N
C.
150 N
D.
30 N
The formula for force in a hydraulic system is F1/F2 = A2/A1. So, F1 = (F2 x A1)/A2. Thus, F1 = (100 x 4)/36 = 11.1 N/cm2. Finally, F1 = 11.1 x π x 6^2 = 1245.60 N.
Respuesta Correcta: A
Test
Pregunta 8/108/10
Optics
Optics
Optics
A light ray passes through the air and enters a glass block. What happens to the light ray?
Seleccione la respuesta:Seleccione la respuesta
1 respuesta correcta
A.
It speeds up.
B.
It reflects back.
C.
It bends away from the normal.
D.
It bends towards the normal.
When light enters a denser medium, like from air to glass, it slows down and bends towards the normal.
Respuesta Correcta: D
Test
Pregunta 9/109/10
Pulleys
Pulleys
Pulleys
A pulley system consists of a fixed pulley and a movable pulley. The fixed pulley is attached to a ceiling, while the movable pulley is attached to an object. Which statement best describes the mechanics of the system?
Seleccione la respuesta:Seleccione la respuesta
1 respuesta correcta
A.
The effort force is less than the weight of the object.
B.
The effort force does not affect the weight of the object.
C.
The effort force is equal to the weight of the object.
D.
The effort force is more than the weight of the object.
In a pulley system with a fixed and movable pulley, the effort force required to lift the object is equal to half of its weight. This is because the force is distributed between the two pulleys, resulting in less effort required to lift the object.
Respuesta Correcta: A
Test
Pregunta 10/1010/10
Thermodynamics (Heat)
Thermodynamics (Heat)
Thermodynamics (Heat)
A car engine cylinder has a temperature of 100°C and the outside temperature is 20°C. What happens to the heat energy produced in the cylinder?
Seleccione la respuesta:Seleccione la respuesta
1 respuesta correcta
A.
It condenses
B.
It evaporates
C.
It stays in the cylinder
D.
It transfers to the air
Heat energy always flows from a hotter object to a colder object. Therefore, the heat energy produced in the cylinder will transfer to the surrounding air which is at a lower temperature.
Bennet Mechanical Comprehension Test (Inglesa) Los test de práctica desbloquean todas las preguntas del simulador online
¡Gracias por elegir la versión gratis de prueba de práctica test de Bennet Mechanical Comprehension Test (Inglesa) ! Profundiza aún más tus conocimientos con Simulador de Test de Empleo; desbloqueando la versión completa de nuestro simulador de Bennet Mechanical Comprehension Test (Inglesa) podrás hacer test con más de 360 preguntas actualizadas constantemente y aprobar fácilmente tu examen. El 98% de la gente aprueba el examen a la primera después de prepararse con nuestras 360 preguntas.
¿Qué esperar de nuestros Bennet Mechanical Comprehension Test (Inglesa) test de práctica y cómo prepararte para cualquier examen?
Los test de práctica Bennet Mechanical Comprehension Test (Inglesa) del simulador son parte de la Test de Empleo Base de datos y son la mejor manera de prepararse para cualquier examen de Bennet Mechanical Comprehension Test (Inglesa).
Los test de práctica de Bennet Mechanical Comprehension Test (Inglesa) consisten en 360 preguntas divididas por 12 temas y están escritas por expertos para ayudarte a aprobar el examen en el primer intento. La base de datos de Bennet Mechanical Comprehension Test (Inglesa) incluye preguntas de exámenes anteriores, lo que significa que podrás practicar preguntas anteriores y futuras. La preparación con el simulador de Bennet Mechanical Comprehension Test (Inglesa) te dará también una idea del tiempo que te llevará completar cada sección de los test de práctica de Bennet Mechanical Comprehension Test (Inglesa) . Es importante saber que el Simulador de Bennet Mechanical Comprehension Test (Inglesa) no reemplaza las clásicas guías de estudio de Bennet Mechanical Comprehension Test (Inglesa) ; aún así, el Simulador ofrece información útil sobre qué esperar y cuánto tendrás que practicar para estar preparado para el día del examen de Bennet Mechanical Comprehension Test (Inglesa) .
Los test de práctica de Bennet Mechanical Comprehension Test (Inglesa) representan una excelente herramienta para prepararte para el examen real junto con nuestros test de práctica de Test de Empleo . Nuestro Simulador de Bennet Mechanical Comprehension Test (Inglesa) te ayudará a evaluar tu nivel de preparación y a entender tus fortalezas y debilidades. Abajo puedes leer todos los test que encontrarás en nuestro simulador de Bennet Mechanical Comprehension Test (Inglesa) y cómo nuestra base de datos de Bennet Mechanical Comprehension Test (Inglesa) compone preguntas reales:
Información del test:
Nombre del test:Bennet Mechanical Comprehension Test (Inglesa)
Número total de preguntas:360
Número de preguntas para el test:55
Puntuación de aprobado:80%
Número de temas:12 Temas
Temas de estudio:Número de preguntas:
Acoustics:30 Preguntas
Centrifugal Force:30 Preguntas
Electricity:30 Preguntas
Fluids:30 Preguntas
Force and Torque:30 Preguntas
Gears:30 Preguntas
Hydraulics:30 Preguntas
Optics:30 Preguntas
Pulleys:30 Preguntas
Thermodynamics (Heat):30 Preguntas
Velocity:30 Preguntas
Wheels:30 Preguntas
Puedes prepararte para los exámenes de Bennet Mechanical Comprehension Test (Inglesa) con nuestra aplicación móvil. Es muy fácil de usar e incluso funciona sin conexión a internet, con todas las funciones que necesitas para estudiar y practicar con nuestro Simulador de Bennet Mechanical Comprehension Test (Inglesa) .
Usa nuestra aplicación móvil, disponible para dispositivos Android e iOS, con nuestro Simulador de Bennet Mechanical Comprehension Test (Inglesa) . Puedes usarla donde quieras y recuerda siempre que nuestra app es gratis y disponible en todas las App Stores.
Nuestra aplicación móvil contiene todos los test de práctica de Bennet Mechanical Comprehension Test (Inglesa), que constan de 360 preguntas divididas en 12 temas y ofrecen material de estudio para aprobar el examen final de Bennet Mechanical Comprehension Test (Inglesa) con éxito garantizado.
Nuestra base de datos de Bennet Mechanical Comprehension Test (Inglesa) contiene cientos de preguntas y test de Test de Empleo relacionados con el examen de Bennet Mechanical Comprehension Test (Inglesa). Así puedes practicar donde quieras, incluso sin conexión a internet.