What is an IRTEC Mock Assessment?

The Purpose of the IRTEC Mock Assessment is to Assist Technicians in Assessing their Readiness for the Official IRTEC Assessment. A Good Mock Assessment Provides You with Opportunities for Practising Judgement; Technical Standards; and Safe Decision-Making.

The Purpose of the IRTEC Test Questions is to Facilitate Your Review of Key Principles Prior to the Assessment. Although the Mock Test or the Test Questions Are Not a Replacement for the Official Assessment, They Can Aid in Preparing You for the Actual Assessment.

A Mock Test Provides You with Safety to Practise. You Can Review Weak Areas; Repeat Questions; and Gain Confidence Before Booking Your Actual Assessment.

Topics for an IRTEC Mock Test

IRTEC questions typically refer to the routes you choose, which may emphasize areas of inspection, maintenance, diagnosis, communication or support. The type of vehicle class and technician level also dictate the route you will be taking.

One of the most important things you should do prior to beginning any studies is to check the specific route you have chosen. This will enable you to narrow down your studies to those particular topics.

Hydraulic and Pneumatic

Hydraulic and pneumatic systems, which involve pressure, how to control pressure, leaks, actuators, and safe system checks are important to know because a significant number of commercial vehicles rely on some type of air or fluid system that provides the necessary operating pressure for the safe operation of the vehicle.

Effective Communication

Effective Communication is defined as a clear and concise description of a fault or problem. A record of the fault problem in written form. It have clear technical notes in writing. It reduces confusion in all types of workshops, fleets and other environments where safety is critical.

Wheel Alignment and Steering

Topics related to wheel alignment and steering include the different types of steering components, steering angles, the amount of steering play and how adjusting these parameters affects the overall steering geometry of the vehicle. Understanding these areas will assist you in determining whether or not a vehicle can safely drive on a given road.

Electrical Engine Systems

Electrical Systems for the engine include starting and charging systems, sensors, circuits and the testing of electrical faults. This knowledge will allow you to diagnose electrical faults and determine whether or not you will be able to repair the fault safely.

Braking Systems

Braking systems include service brakes, parking brakes, airbraking systems, brake wear and braking system defects. Heavy goods vehicles (HGV), public service vehicles (PSV) and trailers are totally dependent on having a safe braking system.

Computerised Test Equipment

Computer test equipment includes scan tools, diagnostic hardware, stored fault codes, live data, and interpretation of test results. This is more than simply looking at a monitor and identifying a fault; it requires being able to correlate the test results with the true mechanical fault in the vehicle.

Electrical Systems

Electrical systems include vehicle wiring, lights, batteries, fuses, relays, control modules and procedures for testing electrical systems. Since a large percentage of vehicle malfunctions have their origin in electrical faults, the subject of electrical systems must be studied in significant depth.

Mechanical Engine Systems

Mechanical engine systems include the operation of an engine, the lubrication systems that service the engine, the coolants that are used to cool the engine, the timing of the engine and vehicle specifications, and the mechanical checks on the engine that must be performed. Knowledge of these topics will assist you in identifying which faults or failures are the result of normal wear and tear on the engine versus actual mechanical defects that need to be repaired.

Chassis Systems

Chassis systems include chassis frames, suspension systems, mounting systems, axles, and safety check systems. Each of these systems affects the stability of the vehicle during operation and therefore the safety of the vehicle when on the road.

Instructional Support

Instructional support will typically assist senior technicians in guiding technicians lower than them. Helpful instructional support concepts include: how to perform a particular work method; how to continue learning in the workplace; and technical assistance. The topic of Instructional Support will usually apply to license categories of higher levels.

Electrical Service Diagnoses

Electrical service diagnoses, including advanced methods of testing, developing a plan for testing, and organizing evidence-based diagnoses are imperative because you must obtain all evidence before deciding what service action(s) you will perform.

Diesel Fuels & Exhaust Emissions

As diesel fuel & exhaust emissions continue to receive more scrutiny in regards to cleaner exhaust operation and performance, these topics will remain relevant and will continue to be of significant importance to the transportation industry.

How to Register to take an IRTEC Mock Assessment

When registering with IRTEC, it is important to select your assessment route before booking your assessment. Do not book a generic assessment without first identifying your route. The commonly used routes that can be found at IRTEC include: inspection technician; service & maintenance technician; advanced technician; or master technician.

Once you have selected your route, verify that your experience and qualifications meet the eligibility criteria for your selected route.

Schedule an Assessment through an Approved IRTEC Assessment Centre

By scheduling your assessment at an IRTEC approved assessment centre, you will be able to receive detailed information regarding your assessment route, vehicle class, assessment date, required documentation, payment methods, and available preparation training programs.

Before contacting an approved assessment centre, please check that you hold the appropriate level of accreditation for the route you are registering for, as the entry requirements and practical component can vary by route.

Confirm the Costs of IRTEC Assessments Before Booking Your Assessment

There is no fixed or national set price for IRTEC assessments. Prices for IRTEC assessments can vary based on the assessment centre, route, location, or type of preparation training program.

In addition to the standard IRTEC testing fees, there may also be other fees associated with workplace assessments; therefore, please confirm the total testing costs prior to making your booking.

Identifying IRTEC Assessments Are Available

The IRTEC assessments do not work on a first-come, first-served basis like a job with a limited number of national vacancies. Each assessment centre manages its own schedule, capacity, and of course, assessment scheduling.

There will be available dates based on where you are located in relation to your selected assessment centre.

Use the IRTEC Test Questions to Practice for Your Assessment Prior to Paying for the Official Assessment

Using the IRTEC Test Questions to prepare for your assessment will give you an opportunity to evaluate your readiness prior to committing to the official assessment registration process; therefore, you will have the opportunity to identify your weaknesses that you can work on before you complete the official assessment registration process.

Would you like to practice a little bit more prior to your assessment? Please use these practice test questions to assess your level of readiness for your exam.

Finding an IRTEC Mock Test

An IRTEC assessment can only be done in an approved IRTEC centre which is located throughout the UK, so it is important to know your nearest approved IRTEC centre.

Some approved IRTEC centres have multiple facilities. Also be aware that not all types of ISSA may be approved for testing, if not you must have to go to that approved centre listings for either type.

Official Assessment Sites

The assessment can be conducted at an assessment centre or at your place of work when working with an approved assessor but must be assessed under controlled conditions.

Note that there might be additional charges if doing an assessment at your workplace; check this prior to making a booking.

Online Practice Support

Do not confuse the IRTEC Mock Test with the official IRTEC assessment sites. You are able to obtain access to online learning materials by accessing home, work or wherever you are studying.

The IRTEC Assessments do have to take place at an approved assessment centre; however, if you are looking to complete any of these assessments it is highly recommended to practice thinking through the actual occurrences that would occur within a real workshop.

How the IRTEC Mock Test Is Structured

The structure of the official IRTEC Mock Test is determined by how you obtain your licence. With the route of an Inspection Technician, for instance, you must complete a knowledge assessment online that contains 40 multiple choice questions.

To pass this assessment, you typically need to achieve a minimum score of 70%. The content of the assessment will include laws, roadworthiness of vehicles, inspection standards and how to make decisions about defects.

Knowledge Assessment

The goal of the knowledge assessment is to measure how well you know the rules of operation, inspection standards and how to make safe decisions. Some routes will allow you to have access to relevant manuals during the assessment.

Be sure to check the rules on your licence route prior to taking the assessment.

Practical Assessment

The practical assessment measures your ability to safely perform the processes, use the proper tools, and complete all steps required for conducting a safe inspection. It will also measure your skill at determining whether a vehicle is safe to operate.

Therefore, one part of the assessment measures your knowledge, while the other part measures your application of that knowledge.

Assessment Time

Assessment times for the knowledge assessment can take up to one hour for some technician routes, while for the practical assessments there will be variability in time depending on both the technician route chosen and the class of vehicle used for testing.

The practical assessment can take anywhere from one hour to two hours depending on the type of assessment administered. Always check the specific route page before booking or planning your assessment date.

Mock Test Purpose

The purpose of the IRTEC Practice Test is to provide practice only and does not provide any official status or value towards obtaining a licence. The mock test provides you with the experience of working under time constraints, allows you to review the knowledge areas tested, and helps you feel comfortable with the testing format. The IRTEC Test Questions also demonstrate the possible responses to the actual repair and inspection situations a technician may encounter.

Scoring and Passing

Many public pages will have information showing the expected pass score for each route. However, there is not necessarily a universal score across routes.

The scores for practice quizzes will change based on the quiz system used. In order to pass an actual assessment you must complete both the necessary knowledge assessment as well as practical assessments as required by the specific route.

Who Could Benefit from a Mock Test?

A mock test can benefit you if you operate commercial vehicles, trailers or passenger vehicles since it can assist in determining whether you possess the information required by industry standards to complete your route.

For Technicians in Existing Workshops

A technician who already works in a workshop can use a mock test to validate their current knowledge before taking the formal assessment.

How Employers Prepare Employees for Assessments

Employers including an employee as part of an assessment can use mock tests however, it is mandatory that the employer checks that each candidate meets the actual entry requirements for the assessment.

Entry Requirements for Vehicles

A candidate looking for a position within an inspection technician route must have relevant industry experience and/or a Level 3 qualification in order to successfully sit for an assessment. For Service and Maintenance routes, the qualifications needed are typically less.

Vehicle Positions with Higher Skill Levels

Candidates in higher level positions such as master technician would typically have a greater amount of industry experience and could provide the greatest level of industry-specific knowledge.

Age Restrictions and Routes

You should check with the route details or your assessment process to see if there are any age restrictions or specific entry requirements.

How Hard Is the IRTEC Mock Examination?

The IRTEC Mock Exam can seem rather difficult if your learning involves only memorizing definitions of terms. The major challenge lies in applying your knowledge in a rational way. You will need to inspect, maintain, assess defects, and take appropriate corrective action. So it is important that you are able to comprehend the definition of a fault, why that fault is a problem, and what corrective action should be taken.

Difficulty Changes Based on Corridors

The level of difficulty changes based on the corridor you choose; For example, on the Service Maintenance corridor the examination may test you at a lesser depth than the Master Technician’s corridor examination will.

Do Not Trust FALSE Pass Rates

You cannot rely upon false pass rates to evaluate how well you will perform on the exam. You cannot also assume that your practice score is indicative of how successful you will be at the actual exam. Rather, you should focus on your weak areas, complete multiple mixed-practice examinations, then compare your answers to the “correct” answers to each examination so that you can learn rather than guess at your answers.

You can maximize your preparation for success with this current exam by accessing focused practice assessments which are correlated to your area of study in your major.

Professional Advantages

By taking the IRTEC Mock Test, you will gain an accreditation as a recognised technician in maintaining road transport (the “licence” belongs to you, the Technician and not to your employer), therefore, you will be able to demonstrate independent competency against an approved route standard.

The Mock Test will give you the opportunity to become familiar with the formal assessment testing of brake systems; steering systems; electrical systems; diagnostic systems; chassis systems; communication systems; and how all of those systems work together to keep the vehicle safe.

Career and Workshop Value

Your professional value is enhanced by the evidence of your skill set and confidence in your decision-making within the workshop environment; as a result, you will have an easier time discussing inspections with either your employer or colleagues.

The Mock Test can also support you with your professional development in any of your future roles as a member of either a fleet, workshop, maintenance or public transport organisation.

There are significant differences in real-life outcomes based on actual income and employment examples. Regardless of the fact you have taken a practice test or obtained a licence, neither of those will guarantee a higher income level.

Establish Your Skill Level

The best way to determine your skill level prior to the formal assessment is by taking the diagnostic practice test. This will help you evaluate any weaknesses prior to your formal assessment.

Guide to Completing the IRTEC Mock Test

Number your chosen route and look over the eligibility requirements. Next, make a list of topics for your route.

Divide your study time into small increments. Don’t just focus on rerunning what you have already learned.

Emphasize Weak Areas

You should spend more time learning about those topics with which you are experiencing difficulty. Topics that tend to create issues for individuals include issues regarding roadworthiness guidance, defect judgements, braking, steering, electrical systems, etc.

This is beneficial for you as you will maximize your use of your time.

Employ Easy-Quizzz Simulation and Mobile App

Using the Easy-Quizzz Simulator and Mobile App for continuous practice will help develop a regular practice schedule. When you practice, you could simulate the time limits associated with “mock tests.”

Adopt a Basic Study Method

You should use the 3-step method to study:

1. Study Core Material
2. Answer Related Questions Without References
3. Review every incorrect answer and note correct reason.

Utilizing this method provides you the opportunity to transition from knowledge-based to judgement-based education.

Record ALL Attempts

You should use the IRTEC Practice Test multiple times and monitor your score after each use.

Then, you will want to determine what the cause of each incorrect response was. 

Understanding and Using Easy-Quizzz to Study and Practice For Your Examination

To help you prepare to take the official exam, please use the Easy-Quizzz practice quizzes after you’ve become familiarized with the structure of the exam. While Easy-Quizzz is not an alternative to the official tests, it can still assist you by allowing you to create a rhythm and practice using the same type of multiple-choice answers as you would on a real exam in an timed environment.

Practice Set Information

This practice set has a total of 576 different practice questions; each practice session has a total of 180 minutes in which to complete all of the questions. You must complete the entire session in order to be counted. The success/average rate of completion is 70%, which provides you with a basis for comparison to determine how much you have improved from your first practice to your last.

The Scoring Categories

Your scoring categories give a breakdown of score points earned for: correct answer – incorrect answer and unanswered question. The actual score points may differ with each screen of your Practice Quiz. For example, ensure that you review the Practice Quiz screen before you start; you will need to refer back to the scoring summary after each attempt.

Distribution of Practice Questions By Scoring Category

How does Topic-Based Practice benefit you?

Using topic based practice helps you discover any knowledge gaps before they become a problem. For example, looking at your brake system questions compared to your other systems will demonstrate if you have the need to study more on the brake system.

On the other hand, if you improve your electrical system but your chassis questions continue to be weak, then you can identify where to focus next.

Utilizing your study time effectively

By utilizing this method to approach your studying, you won’t have to read through everything once again.

Instead, you will want to spend most of your time studying the areas that contributed to your overall low scores. As you do additional practice sessions, you will be able to “see” your overall improvement more clearly.

Gradually improves your confidence

Completing multiple structured sessions builds confidence and will also prepare you for completing any future IRTEC mock test.

While practice cannot guarantee success, it certainly provides an opportunity to learn, refresh, and gradually improve from your step by step progress. 

Exhaustive Official Resources

Prior to scheduling your appointment, make sure that you have verified the location, review of the assessment centre policies, and the rules, standards, and requirements for the roadworthiness of your vehicle.

Additionally, you will want to review and reconfirm the requirements for the vehicle class and technician type that you are pursuing in order to determine the fees prior to paying the assessment centre for your vehicle class and technician type.

By verifying this information, you will ensure that your review and preparation is both knowledge-based and practical judgement-based as well.

Commonly Asked Questions About the IRTEC Mock Examination

What is the average time needed to prepare for the examination?

Preparation time is dependent on route, experience and weak areas, thus, a technician completing regular inspection tasks may not require as much time as an individual entering a new route. The simplest method of preparation is to break studying into small blocks of time, practice using different forms of questioning and review all the questions that were answered incorrectly after every examination.

Where is the Certification exam conducted? Is there an online Certified Knowledge examination?

Certain Routes offer the Certified Knowledge examinations via online testing. However, the overall process for obtaining licensure typically includes Practical Assessments. Some Practical Assessments may take place at registered locations. In some instances the Employer may have workplace testing completed using an approved Assessor.

Can you schedule an appointment without having any prior to work experience?

All IRTEC Routes have prerequisite requirements, which will usually consist of an industry experience requirement and/or an industry qualification dependant upon your level of licence and vehicle(s) class that you wish to be licensed for; therefore make sure you look into your Route prior to spending any money on an exam.

What is the procedure after successfully passing the Certified Knowledge assessment?

Once you pass the first part of the assessment you may be required to complete your remaining assessments within a particular time-frame. Most of the IRTEC Routes require the completion of your remaining assessments within twelve months from the first assessment date. Speak with your assessment centre on the specifics of your Route and your appointment.

What is the expected duration of my IRTEC licence after obtaining my credentials?

The vast majority of IRTEC licences are valid for a period of five (5) years. If you apply for or obtain licensure after five (5) years, you will be expected to re-assess in order to continue to hold a valid licence. Some Specialty Routes may have varying lengths of validity for the specific routes. It is always good practice to confirm route specific information before you rely on your appointment date.

Do I need to practice the assessment even though I have extensive workshop experience?

Yes. While having workshop experience is beneficial, it is likely there are areas that are included in the assessment that you do not have daily contact with. Practicing will allow you to familiarize yourself with style of questions, how long it will take to complete the assessment, the types of subjects to be included in the assessment and how difficult the equipment details will be. Practicing will also reveal subjects that may not have been completed on a recent basis as a result of your work responsibilities.

Are You Ready to Get Started?

Obtain the means to study, practice the questions and review the materials, in order to prepare yourself for the next stage.