20:00

Free Test
/ 10

|
4.6

Quiz

1/10
Abrasive Wheels Risk Assessment
Who is responsible for visually inspecting hand tools, such as abrasive wheels?
Select the answer
1 correct answer
A.
The operator should visually inspect hand tools before each use.
B.
The site supervisor should visually inspect hand tools before each use.
C.
The user should visually inspect hand tools once a week.
D.
The site supervisor should visually inspect hand tools once a week.

Quiz

2/10
Abrasive Wheels Risk Assessment
Should users of abrasive wheels be concerned with contracting vibration white finger?
Select the answer
1 correct answer
A.
Only if they use it for more than three days a week.
B.
Yes, as abrasive wheels cause vibrations.
C.
No, as the vibrations are not very severe.
D.
Only if the site supervisor says no.

Quiz

3/10
Abrasive Wheels Risk Assessment
Who is allowed to change a disk to an abrasive wheel?
Select the answer
1 correct answer
A.
Anyone over the age of 18.
B.
Only supervisors.
C.
Trained and competent persons only.
D.
Any site personal.

Quiz

4/10
Abrasive Wheels Risk Assessment
What pressure should be applied when using an abrasive wheel?
Select the answer
1 correct answer
A.
Firm, steady pressure at all times.
B.
Press hard until it gets to hot. Causing the disc to cut into the material.
C.
The heavier you press the better.
D.
The lighter you press the better.

Quiz

5/10
Abrasive Wheels Risk Assessment
How often should on site tools be PAT tested?
Select the answer
1 correct answer
A.
Every three months.
B.
Once a year.
C.
Prior to use.
D.
They don't need checking.

Quiz

6/10
Abrasive Wheels Risk Assessment
If the abrasive wheel starts to judder when in use, what should you assume?
Select the answer
1 correct answer
A.
Variations in the material being cut have caused the judder.
B.
The tool is defective and should be removed from use until repaired.
C.
You must have applied too much pressure. Just ease off a bit.
D.
You must not have applied enough pressure. Just press harder.

Quiz

7/10
Abrasive Wheels Risk Assessment
If your supervisor asked you to use an abrasive wheel that you were not familiar with, what would you do?
Select the answer
1 correct answer
A.
Have a go and assume it works like others you have used.
B.
Ask one of your work mates how to use it.
C.
Inform your supervisor that you need further training.
D.
Ignore your supervisor and start a different job.

Quiz

8/10
Abrasive Wheels Risk Assessment
Discs are manufactured to cut different materials. Can these be interchanged?
Select the answer
1 correct answer
A.
The stone discs can cut metal.
B.
The metal disks can also cut stone.
C.
Both types of disks can cut the other material but not effectively.
D.
Metal disks cut metal and stone disks cut stone.

Quiz

9/10
Abrasive Wheels Risk Assessment
How should you use the guard on an abrasive wheel?
Select the answer
1 correct answer
A.
You should only cover the blade when it is in storage.
B.
You should cover the blade at all times when it is not in use and uncover it when it is in use.
C.
The guard is only for trainees to use.
D.
The guard should cover as much of the blade as in practically possible when in use.

Quiz

10/10
Abrasive Wheels Risk Assessment
When should guards be used on abrasive wheels?
Select the answer
1 correct answer
A.
When the supervisor is about.
B.
When showing trainees how to use the abrasive wheel.
C.
Always when the wheel is in use.
D.
When the abrasive wheel is put into storage so that the blade doesn't get damaged.
Looking for more questions?Buy now

Abrasive Wheels Risk Assessment Practice test unlocks all online simulator questions

Thank you for choosing the free version of the Abrasive Wheels Risk Assessment practice test! Further deepen your knowledge on CSCS Test Simulator; by unlocking the full version of our Abrasive Wheels Risk Assessment Simulator you will be able to take tests with over 30 constantly updated questions and easily pass your exam. 98% of people pass the exam in the first attempt after preparing with our 30 questions.

BUY NOW

What to expect from our Abrasive Wheels Risk Assessment practice tests and how to prepare for any exam?

The Abrasive Wheels Risk Assessment Simulator Practice Tests are part of the CSCS Test Database and are the best way to prepare for any Abrasive Wheels Risk Assessment exam. The Abrasive Wheels Risk Assessment practice tests consist of 30 questions divided by 1 topics and are written by experts to help you and prepare you to pass the exam on the first attempt. The Abrasive Wheels Risk Assessment database includes questions from previous and other exams, which means you will be able to practice simulating past and future questions. Preparation with Abrasive Wheels Risk Assessment Simulator will also give you an idea of the time it will take to complete each section of the Abrasive Wheels Risk Assessment practice test . It is important to note that the Abrasive Wheels Risk Assessment Simulator does not replace the classic Abrasive Wheels Risk Assessment study guides; however, the Simulator provides valuable insights into what to expect and how much work needs to be done to prepare for the Abrasive Wheels Risk Assessment exam.

BUY NOW

Abrasive Wheels Risk Assessment Practice test therefore represents an excellent tool to prepare for the actual exam together with our CSCS Test practice test . Our Abrasive Wheels Risk Assessment Simulator will help you assess your level of preparation and understand your strengths and weaknesses. Below you can read all the quizzes you will find in our Abrasive Wheels Risk Assessment Simulator and how our unique Abrasive Wheels Risk Assessment Database made up of real questions:

Info quiz:

  • Quiz name:Abrasive Wheels Risk Assessment
  • Total number of questions:30
  • Number of questions for the test:50
  • Pass score:80%
  • Number of topics:1 Topics
Study topics:Number of questions:
  • Abrasive Wheels Risk Assessment:30 Questions

You can prepare for the Abrasive Wheels Risk Assessment exams with our mobile app. It is very easy to use and even works offline in case of network failure, with all the functions you need to study and practice with our Abrasive Wheels Risk Assessment Simulator.

Use our Mobile App, available for both Android and iOS devices, with our Abrasive Wheels Risk Assessment Simulator . You can use it anywhere and always remember that our mobile app is free and available on all stores.

Our Mobile App contains all Abrasive Wheels Risk Assessment practice tests which consist of 30 questions that are divided by 1 topics and also provide study material to pass the final Abrasive Wheels Risk Assessment exam with guaranteed success. Our Abrasive Wheels Risk Assessment database contain hundreds of questions and CSCS Test Tests related to Abrasive Wheels Risk Assessment Exam. This way you can practice anywhere you want, even offline without the internet.

BUY NOW